77
Chapter 9
Accessing The Digital
Receiver
TF 6000 PVR provides a web service and FTP service. You can
make a timer recording or download a recording file using
those services. Here you need a wireless router, which will
connect the digital receiver to your computer or the Internet.
To use the web service of the digital receiver, you should take
the following steps:
1. Configuring a router for the digital receiver.
2. Configuring the digital receiver’s Wireless Local Area
Network (WLAN) settings.
3. Accessing the home page of the digital receiver.
Refer to § 9.3 for detailed description about things you can use
on the web service of the digital receiver.
NOTE
The web server and FTP server of the digital receiver don’t
work in standby mode. So it must be powered up all the time
if you wish to use the web service at any time.
To Next Page
Loading...
