7.1 Recording a program 61
To input a timer recording, se-
lect the Timer Setting menu;
then the timer list will be dis-
played.
To add a new timer event, press the button, and a box like
the above figure appears; take the following steps.
1. Set the Record option to On to make a recording. If
this option is set to Off, the digital receiver will turn on
at the specified time but not record; instead, you may
record with your video cassette recorder or suchlike in
this case.
2. If you want a radio program, set the Type option to Ra-
dio; otherwise, set it to TV.
3. Set the Satellite option to the satellite which transmits
the service you want. Pressing the
OK button on this
option displays a satellite list, from which you can select
your desired satellite. Set the Tuner Select option to a
tuner to receive your desired service.
4. Set the Service option to the service which provides the
program you want. Pressing the
OK button on this
option displays a service list, from which you can select
your desired service.
5. There are five timer modes:
One Time means literally ‘one time’.
Every Day means literally ‘every day’.
To Next Page
Loading...
Need help?
General