Topfield TRF-2200 - Page 4

iv
1. Connect aerial antenna to ANT IN
unit.
2. Connect your desired audio-video cables from back of
3. Plug into power point and turn Topeld unit ON.
Topeld to rear of television (Composite, HDMI).
select the correct video input channel for the Topeld (for
4. Switch television on, then use the television remote to
example, AV1, AV2,Composite, HDMI, etc).
5. On the main menu go to Installation/Searching then
scroll to Start Search, press
OK .
Wait until the progress bar on bottom of screen reache
100 %then press
OK to save and EXIT .