Topfield TRF-2200 - No Power; No Front Display; No Picture on Television

50 Troubleshooting
I am unable to get out of the MENU ............ 53
No picture through RF loop out to my Television .... 53
My Topeld recorder doesn’t go to standby after instant
recording (non timer recording) 3
Cannot view guide content ................. 5
.............. 5
3
Before you call a repair person for your Topeld product, check
the list of possible problems and solutions.
No power / No front display
Ë Make sure the main switch on the back of Topeld is
switched to ON.
Ë Properly insert the power plug into the power socket.
Ë If the power outlet is controlled by a switch, make sure
the wall switch is ON.
Ë Remove the power plug from the wall and wait 10 sec-
onds, then plug back in.
Ë Plug another appliance into the outlet, if the other appli-
ance doesn’t work then have a qualied electrician repair
the outlet.
Ë Plug the Topeld into a dierent outlet.
I have connected my Topeld and get
no picture on the Television
Ë Check that you have connected the cables from the Top-
eld to the TV
Ë The connection must be via an AV output out of the Top-
eld to an AV input of the TV.
Ë Check that you are in the correct AV setting on the TV.
For example if you connected the Topeld box to AV2 on
the TV make sure you set your TV with the TV remote to
AV2 before the Topeld can be used.
Ë Press the button on the remote and setto the correct
V F
resolution.
576i/576p/720/1080i/AUTO. You may need to press the