Need help?Do you have a question about the Topkodas PROGATE and is the answer not in the manual?
General| Brand | Topkodas |
|---|---|
| Model | PROGATE |
| Category | Controller |
| Language | English |
Key features of the PROGATE GSM gate controller, including connectivity, remote control, and outputs.
Detailed specifications of the PROGATE module, including GSM, inputs, outputs, power supply, and environmental.
Standard and optional items included in the PROGATE package.
General view of the PROGATE module, detailing LEDs and terminal block connections.
Explanation of the meaning of LEDs and the function of each terminal block contact.
Steps for physically mounting the PROGATE module and preparing for installation.
Diagrams and instructions for wiring the PROGATE to an automatic gate control unit.
Basic preparation steps and controlling the PROGATE via a free short call.
Steps to download, install, and get started with the SERANOVA mobile application.
Instructions for controlling and configuring the PROGATE using SMS text messages.
Summary of available methods for configuring the PROGATE module.
Setting and managing installer and user passwords for configuration and control.
Configuring user access codes for keypad and SERANOVA app authorization.
Wiring and programming Wiegand keypads, RFID readers, and iButton probes.
Wiring and configuring programmable outputs (PGM) for bells, relays, and LEDs.
Setting output modes like timer, steady, pulse, and their operational conditions.
Configuring outputs for access control and logging events for audit purposes.
Wiring inputs as zones using End-of-Line (EOL), Normally Closed (NC), or Normally Open (NO) configurations.
Configuring general system settings, timers, and module parameters via SERA2 software.
Setting up automatic or manual clock synchronization for accurate timekeeping.
Configuring system fault detection, trouble reporting, and response actions.
Configuring zone parameters, types, bypass, and alarm event limits.
Detailed programming of outputs for various functions like bell, buzzer, flash, and system state.
Managing users, phone numbers, access levels, and schedules for system control.
Configuring SMS and dial notifications for alarm events and system status changes.
Setting up specific phone numbers to receive SMS and dial alerts for different events.
Customizing the text of SMS messages sent for various alarm and event reports.
Configuring event codes and text for detailed event logging and reporting.
Monitoring real-time hardware status, inputs, outputs, and GSM information.
Viewing real-time zone states and controlling system states (ARM, DISARM, SLEEP, STAY).
Enabling and configuring TCP/IP settings for remote control over the internet.
Viewing and managing the chronological log of system events and occurrences.
Steps to activate and configure remote control, monitoring, and firmware updates via the internet.
Detailed list and explanation of installer SMS commands for system configuration and information retrieval.
Detailed list and explanation of user SMS commands for system control and status requests.
Accessing information about the module's hardware, bootloader, firmware, and GSM modem.
Step-by-step guide for updating the PROGATE module's firmware.
Details of the product warranty, conditions, and exclusions.
Essential safety guidelines and precautions for installing and servicing the PROGATE module.
To Next Page
