PROGATE User manual V-2022-09-20 13 | EN
3.5.1 SERA could service
SERA Could Service – is used for remote connection to device via internet using SERA2 or SERANOVA app.
Imortant! If there is no data plan on your SIM card. [SERA Cloud service] must be deactivated. Using SERA2 or SMS command:
INST000000˽010˽0 Otherwise the module will stop working due to a lost data connection.
To connect to device using [SERA Could Service] is need to have UID=IMEI of device and AppKey (Default 123456)
1. Change default App Key (Default 123456). SERA2> GSM Communication> Sera Cloud Service
2. Enter App Key for the remote connection via SERA2. Go to SERA2> Settings Enter the same App Key as in the SERA2> GSM
Communication> Sera Cloud Service
3. To establish a remote connection with the device, the App Key of the device and the SERA2 or SERANOVA must match.
Figure 6 GSM Communication> Sera Cloud Service> App Key
3.5.2 Configuration using SERA2 software
With SERA2 software you can change the controller’s settings (if default settings are not enough)
Download and Install and open free SERA2 configuration & Diagnostic software: https://www.topkodas.lt/Downloads/SERA2_Setup.exe
Connect the controller to a computer using a mini USB cable.
The program will automatically recognize the connected device and will automatically open the controller configuration window.
[Menu > Read] will read configuration of device and show current settings of device.
[Menu > Write] will save the settings made in the program to the device.
[Menu > File > Save] will save the settings into a configuration file. You can upload the saved settings to other Devices later. This allows to
quickly configure multiple devices with the same settings.
[Menu > File > Open] will allow to choose a configuration file and open saved settings.
If you want to revert to default settings, go to Update in the command line and update FW. Or press [Menu->File->Restore Default]
Figure 7SERA2> Inputs/ Burglar Alarm Zones
Figure 8SERA2> Outputs (PGM)
Figure 9SERA2> Users/ Access control
To Next Page
Loading...
Need help?
General