PROGATE User manual V-2022-09-20 38 | EN
7.12 Remote Monitoring, Control, Configuration, FW update over the internet
What can be done remotely connecting to a module over the internet?
The system parameters may be changed
Monitoring system status, temperature sensors may be observed.
Firmware update of the module
How does it works?
Remote connection is established via GPRS using TCP/IP protocol;
The GSM module connects to the internet via a GPRS to SERA cloud server [cloud.topkodas.lt].
The connection is established by the SERA2 configuration tool using unique ID of the module UID IMEI.
PROGATE SERA Cloud Server [cloud.topkodas.lt] SERA2
Or
PROGATE SERA Cloud Server [cloud.topkodas.lt] Standard web browser. Firefox, Chrome etc.
Sera Cloud Server opens tunnel between module PROGATE and SERA2 or APP and lets them communicate to each other via TCP protocol.
GPRS service should be activated for the SIM card of the GSM module. Usually GPRS service is activated automatically otherwise need
contact GSM service provider to inquire about activation of the GPRS service.
Steps to activate Remote control over internet:
1. Install SERA2 software
2. Go to “GSM Communication” window, “GPRS/IP/TCP/UDP” tab.
3. Set APN, Login, Password (default 123456).
4. Go to “GSM Communication” window, “Sera Cloud Service” tab. Set Sera Cloud Service to Default parameters.
5. Write the configuration into the module by pressing “Write” icon
Figure 57 GSM Communication> Sera Cloud Service window
6. Go to SERA2> GSM Communication> CMS Reporting
To Next Page
Loading...