PROGATE User manual V-2022-09-20 21 | EN
Figure 20Outputs (PGM) window
This output could be controlled as fallowing:
- If the user has right to ARM/DISARM system, it always has access to this output.
- If the user has not the right to ARM/DISARM the system (field near ARM/DISARM is not marked (SERA2> User/ Access control)), the
user can access this output only if system is Disarmed.
Figure 21User/ Access control window
- If access is granted by user, 421 event Access granted is stored into the log. If not Access denied event 422 is stored to the log (SERA2>
Events Log)
- if output will have definition [Automation / CTRL] it also can be controlled by user in any way but it will not generate 421 and 422 events
Event log e.g.
1853 Event:1234:1:401:01:001 Time:2017-08-20 14:42:36 Note: , Open by User, User:001, Name:Master
1852 Event:1234:1:422:00:001 Time:2017-08-20 14:41:41 Note: , Access Gained by, User:001, Name:Master
1851 Event:1234:1:406:01:001 Time:2017-08-20 14:41:27 Note: , Cancel, User:001, Name:Master
Outputs can be controlled in Outpus> Out definition> select “Access Gained”
8. If you need to control outputs by short call or SMS, go to SERA2> Users/ Access control window and enter phone numbers of users, who will be
able to control selected outputs via free short call.
Figure 22Users/ Access control window
To Next Page
Loading...