Topshine MT100 - Tracking and Device Information Commands

TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100
- 23 -
function
information to zero.
Set function of receiving
location physical address
name via SMS
W******,111
This function needs support of
the GPRS01 or SMS01 tracking
platform, address SMS will be
received in text format.
Get version and serial
number
W******,600
To get version and serial number
of
current firmware
Get IMEI No. W******,601
To get device IMEI No.
Reboot GPS and GSM
Module
W******,900###
### is the ending character.
Initialization
To turn all the parameters /
settings (except for the
password) to factory default.
W******,990,099###
### is the ending character.
Password Initialization W888888,999,666
This command will reset the
current password to factory
default password 000000
Description Command Remarks
Get current
location
W******,000
Get current location of MT100
Get location in
Google map URL
format via SMS
W******,100
http://maps.google.com/map
s?f=q&hl=en&q=22.542563
,114.077971&ie=UTF8&z=
16&iwloc=addr&om=1
Change user’s
password
W******,001,####
##
****** is old password
###### is new password
Set interval for
automatic timed
reports
W******,002,XXX
XXX is the interval in minute. If
XXX=000 it will stop tracking
Set preset phone
number
for SOS button
W******,003,F,P,T
F=0, to disable this function;
F=1, only sending SMS;
F=2, only calling preset phone number;
F=3, both SMS and calling (default)
P is the button number and should be 1,or 2, or
3.
If SOS button is linked to IN1, then P=1.
T: Preset phone number
(T must be less than 16 digits)
Set over speed
alarm
When MT100
W******,005,XX
XX (the speed preset value)
=00 , disable
=[01<XX<20] (unit: 10Km)