PURPOSE
PURPOSE
This document gives instructions on installing the BT30 Spindle Upgrade Kit for 1100M+.
LOOKING FOR A VIDEO?
Before you begin, select the image below to watch a walk-through video of this entire installation
procedure.
PRODUCT INFORMATION
Product: BT30 Spindle Upgrade Kit for 1100M+ (PN 50472)
Quantity Description
1 9-Position Terminal Block (PN32634)
1 1100MX Spindle Belt(PN50402)
1 BT30 Spindle Cartridge Assembly, 1100MX (PN39590)
1 BT30 Clamping Unit Installation Tool (PN 50385)
Note: Keep this item to use in the future if you need to replace the pull stud clamping unit.
This item isn't used in this installation procedure.
1 Cord Grip (PN 38758)
3 Cable Tie (PN32791)
3 Cable Tie Holder (PN33193)
1 Magnetic Encoder, Readhead (PN 38299)
1 Motor Pulley Spacer, 1100 (PN30347)
2 Screw, Button Head Cap (Flanged), M5 × 0.8 - 10, Stainless Steel (PN 38205)
1 Spanner Wrench (38-42 mm) (PN31038)
1 VFD, 1100MX(PN 35716)
Note: If any items are missing, we can help. Email support@tormach.com to contact Tormach Technical
Support for guidance on how to proceed.
Page 2
©Tormach® 2021
Specifications subject to change without notice.
tormach.com
TD10705: Installation Guide: BT30 Spindle Upgrade Kit for 1100M+ (0521A)
To Next Page
Loading...