Tormax iMotion 1301.FIRE User Manual

Instructions for Use iMotion 1301.FIRE /1401.FIRE T-1540 e 17
!
T1540_2
T1540_11
Tür schliessen
7 Maintenance
The system was tested and approved by a skilled person before initial commissioning. The manufac-
turer recommends that you conclude a service contract in order to maintain the value of your system
for as long as possible as well as to ensure the system operates reliably and safely for a long time.
Only genuine TORMAX spare part should be used. The manufacturer accepts no liability if you fail
to observe this requirement. Original spare parts and original accessories guarantee the safety of
use in accordance with norm EN 16005.
Warning
Possible risk of injury!
Entrapment of limbs can lead to serious injury.
• The drive must be disconnected from all power sources, including batteries during clean-
ing maintenance and replacement of parts.
7.1 Cleaning
• Clean casing parts, the user interface and door leaves with a damp cloth and a commercial cleaner.
7.2 Testing the Fire Protection Function
The operator must test at least once per month whether the door will close.
Press the red manual release button “Close door”. This triggers the emergency closure. The red LED
on the manual reset button indicates that the system has been activated. Once the door is fully closed
no further automatic activation of the opening movement of the door should be possible.
Successful completion of the test must be recorded in the system test book.
Manual release button Manual reset button

Tormax iMotion 1301.FIRE Specifications

General

Brand	Tormax
Model	iMotion 1301.FIRE
Category	Door Opening System
Language	English