16
MAINTENANCE
Squeegee Blades
Whenever the squeegee leaves streaks or
water trails, debris at the blade edges is the
primary cause. Clean the blade edges with a
damp cloth.
If a squeegee blade is worn or nicked, raise
the squeegee assembly and remove the
entire assembly: disconnect the vacuum
hose, loosen both star handles, and slide the
squeegee assembly out.
Remove both guide wheels and end caps.
Pull each blade out from one end, and slide
its replacement into place.
Replace the end caps and guide wheels.
Slide the squeegee assembly back onto its
mount, and tighten both star handles.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
To Next Page
Loading...
Need help?
General