Toro 03675 - Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S)

Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
MaintenanceSafety
•Beforeadjusting,cleaning,servicing,orleaving
themachine,dothefollowing:
–Parkthemachineonalevelsurface.
–Movethethrottleswitchtothelow-idleposition.
–Disengagethecuttingunits.
–Lowerthecuttingunits.
–Ensurethatthetractionisinneutral.
–Engagetheparkingbrake.
–Shutofftheengineandremovethekey.
–Waitforallmovingpartstostop.
–Allowmachinecomponentstocoolbefore
performingmaintenance.
•Ifpossible,donotperformmaintenancewhilethe
engineisrunning.Keepawayfrommovingparts.
•Usejackstandstosupportthemachineor
componentswhenrequired.
•Carefullyreleasepressurefromcomponentswith
storedenergy.
•Keepallpartsofthemachineingoodworking
conditionandallhardwaretightened.
•Replaceallwornordamageddecals.
•Toensuresafe,optimalperformanceofthe
machine,useonlygenuineT ororeplacement
parts.Replacementpartsmadebyother
manufacturerscouldbedangerous,andsuchuse
couldvoidtheproductwarranty.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Afterthersthour
•Torquethewheellugnutsto94to122N-m(70to90ft-lb).
Aftertherst8hours
•Checktheconditionandtensionofthealternatorbelt.
Aftertherst10hours
•Torquethewheellugnutsto94to122N-m(70to90ft-lb).
Aftertherst50hours
•Changetheengineoilandlter.
•Checktheenginespeed(idleandfullthrottle).
Beforeeachuseordaily
•Inspecttheseatbelt(s)forwear,cuts,andotherdamage.Replacetheseatbelt(s)if
anycomponentdoesnotoperateproperly.
•Checktheoperationoftheinterlockswitches.
•Checktheengine-oillevel.
•Checkthecoolingsystem.
•Removedebrisfromthescreen,oilcoolers,andradiator.(Morefrequentlyindirty
operatingconditions).
•Checkthehydraulic-uidlevel.
•Checkthehydrauliclinesandhoses.
•Checkthereel-to-bedknifecontact.
Every50hours
•Greasethebearingsandbushings(andimmediatelyaftereverywashing).
•Checktheconditionofandcleanthebattery.
•Checkthebatterycableconnections.
Every100hours
•Inspectthecoolingsystemhoses.
•Checktheconditionandtensionofthealternatorbelt.
Every150hours
•Changetheengineoilandlter.
Every200hours
•Drainmoisturefromthefueltankandhydraulic-uidtank.
•Checkthereelbearingpreload.
Every250hours
•Torquethewheellugnutsto94to122N-m(70to90ft-lb).
33