Toro 03675 - Cutting Unit System Maintenance; Blade Safety; Checking the Reel-To-Bedknife Contact; Backlapping the Cutting Units

g021221
Figure70
1.Mow-circuittestports(2)
Usethetestportontheliftmanifoldblock(Figure71)
toassistintroubleshootingtheliftcircuit.
g003983
Figure71
1.Lift-circuittestport
CuttingUnitSystem
Maintenance
BladeSafety
•Awornordamagedbladeorbedknifecanbreak,
andapiececouldbethrowntowardyouor
bystanders,resultinginseriouspersonalinjuryor
death.
•Inspectthecuttingunitsperiodicallyforexcessive
wearordamage.
•Usecarewhencheckingthecuttingunits.Wrap
thebladesorweargloves,andusecautionwhen
servicingthereelsandbedknives.Onlyreplaceor
sharpenthereelsandbedknives;neverstraighten
orweldthem.
•Onmachineswithmultiplecuttingunits,takecare
whenrotatingareel;itcancausethereelsinthe
othercuttingunitstorotate.
Checkingthe
Reel-to-BedknifeContact
ServiceInterval:Beforeeachuseordaily
Checkthereel-to-bedknifecontact,regardlessof
whetherthequalityofcuthadpreviouslybeen
acceptable.Theremustbelightcontactacrossthefull
lengthofthereelandthebedknife(refertoAdjusting
theReeltoBedknifeinthecuttingunitOperator's
Manual).
BacklappingtheCutting
Units
WARNING
Contactwiththereelsorothermovingparts
canresultinpersonalinjury.
•Keepngers,hands,andclothingaway
fromthereelsorothermovingparts.
•Neverattempttoturnthereelsbyhandor
footwhiletheengineisrunning.
Note:Whenbacklapping,thefrontunitsalloperate
together,andtherearunitsoperatetogether.
1.Positionthemachineonalevelsurface,lower
thecuttingunits,stoptheengine,engagethe
parkingbrake,andmovetheEnable/Disable
switchtotheDISABLEposition.
2.Unlockandraisetheseattoexposethebacklap
levers(Figure72).
51