Toro 03675 - Adjusting the Rear Wheel Toe-In

g004147
Figure54
1.Locknut2.Traction-adjustmentcam
WARNING
Theenginemustberunningsothenal
adjustmentofthetractionadjustment
camcanbeperformed.Thiscouldcause
personalinjury.
Keephands,feet,face,andotherbody
partsawayfromthemufer,otherhot
partsoftheengine,andanyrotating
parts.
4.Starttheengineandrotatethecamhexineither
directionuntilthewheelsceaserotation.
5.Tightenthelocknuttosecuretheadjustment.
6.Stoptheengine,removethejackstands,and
lowerthemachinetotheground.
7.Testdrivethemachinetomakesurethatitdoes
notcreep.
AdjustingtheRearWheel
Toe-in
ServiceInterval:Every800hours—Checktherear
wheeltoe-in.
1.Rotatethesteeringwheelsothattherear
wheelsarestraightahead.
2.Loosenthejamnutoneachendofthetierod
(Figure55).
Note:Theendofthetierodwiththeexternal
grooveisaleft-handthread.
g004136
Figure55
1.Jamnut3.Wrenchslot
2.Tierod
3.Usingthewrenchslot,rotatethetierod.
4.Measurethedistanceatthefrontandrearofthe
rearwheelsataxleheight.
Note:Thedistanceatthefrontoftherear
wheelsshouldbelessthan6mm(1/4inch)of
thedistancemeasuredattherearofthewheels.
5.Repeatprocedureasrequired.
43