Toro 03676 - Page 51

CleaningtheInstallingthe
Fuel-PickupTube
1.Cleanthescreenattheendofthefuelpick-up
tube(Figure90).
g373881
Figure90
2.Carefullyassemblethefuelpick-uptubeand
oatintothefueltank(Figure91).
g373886
Figure91
1.Cap(fuelsender)
3.Alignthettingsforthepick-uptubeandreturn
tubeinboard.
4.Tightenthefuel-sendercaptothefueltank.
5.Assemblethehoseontothettingsofthefuel
sender,andsecurethehosestothettingswith
theclamps(Figure92).
g373882
Figure92
1.Hoses
3.Fitting(fuelsender)
2.Clamp
6.Plugtheconnectorofthefuel-senderharness
intotheconnectorofthemachinewireharness
(Figure93).
g373884
Figure93
1.2-pinconnector(machine
wireharness)
2.2-socketconnector(fuel
sender)
7.Aligntheholesinthefuel-sendercoverwiththe
holesinthefueltank,andsecurethecoverto
thetankwiththe5Phillips-headscrews(Figure
94).
51