Toro 04384 - Adjusting the Transport Speed; Adjusting the Mowing Speed

nutsareloosenedequallyandsufciently
toallowadjustment.
g016466
Figure41
1.Tractioncable4.Eccentric
2.Bulkhead5.Locknut
3.Jamnuts
Note:Loosenthenutsecuringthe
eccentrictothetopofthehydrostat(Figure
41).
B.Movethefunctional-controllevertothe
NEUTRALpositionandthethrottleleverto
theSLOWposition.
C.Starttheengine.
D.Rotatetheeccentricuntilcreepdoesnot
occurineitherdirection.
E.Whenthewheelstopsrotating,tightenthe
nutlockingtheeccentricandtheadjustment
(Figure41).
F.Verifytheadjustmentwiththethrottlelever
intheSLOWandFASTposition.
G.Fromeachsideofthebulkhead,tightenthe
locknutsevenly,securingthetractioncable
tothebulkhead(Figure41).Donottwist
thecable.
Note:Ifcabletensionexistswhenthe
functional-controlleverisintheNEUTRAL
position,themachinemaycreepwhenyou
movethelevertotheMOWorTRANSPORT
position.
AdjustingtheTransport
Speed
ObtainingtheMaximumTransport
Speed
Thetractionpedalcomesadjustedfor
maximum-transportspeed,butyoumayneed
toadjustitifthepedalreachesfullstrokebeforeit
contactsthepedalstop,orifyouwanttoadecrease
thetransportspeed.
Toobtainthemaximum-transportspeed,putthe
functionalcontrolleverintheTRANSPORTpositionand
pressdownonthetractionpedal.Ifthepedalcontacts
thestop(Figure42)beforeyoufeeltensiononthe
cable,performthefollowingadjustmentprocedure:
g005520
Figure42
1.Pedalstop
1.Putthefunctional-controlleverintheTRANSPORT
positionandloosenthelocknutsecuringthe
pedalstoptotheoorplate(Figure42).
2.Tightenthepedalstopuntilitdoesnotcontact
thetractionpedal.
3.Continueapplyingalightloadonthetransport
pedalandadjustthepedalstopsoitcontacts
thepedalrodandtightenthenuts.
Important:Ensurethatthetensiononthe
cableisnotexcessiveoryouwillreducethe
cablelife.
ReducingtheTransportSpeed
1.Pressdownonthetractionpedalandloosenthe
locknutsecuringthepedalstoptotheoorplate.
2.Loosenthepedalstopuntilyouobtainthe
desiredtransportspeed.
3.Tightenthelocknutsecuringthepedalstop.
40