Toro 30487TC - Controls System Maintenance; Adjusting the Control-Lever Neutral-Interlock Switch; Adjusting the Control-Lever Neutral Return

ControlsSystem
Maintenance
AdjustingtheControl-Lever
Neutral-InterlockSwitch
1.Stopthemachine,movethemotion-controlleversto
theNEUTRAL-LOCKposition,settheparkingbrake,
andremovetheignitionkey.
2.Removetheboltssecuringthefrontpanelandremove
thepanel(Figure50).
1
2
G020875
Figure50
1.Bolt
2.Controlpanel
3.Loosenthe2screwssecuringtheinterlockswitch
(Figure51).
Figure51
1.Controllever3.Screw
2.Neutral-interlockswitch
4.0.4to1mm(0.015to
0.045inch)
4.Holdingthecontrolleveragainsttheframe,movethe
switchtowardtheleveruntilthedistancebetweenthe
leverandswitchbodyis0.4to1mm(0.015to0.045
inch)asshowninFigure51.
5.Securetheswitch.
6.Repeatsteps3to5fortheotherlever.
7.Installthefrontpanel.
AdjustingtheControl-Lever
NeutralReturn
Ifthemotion-controlleversdonotalignwiththeneutral
slotswhenreleasedfromtheREVERSEposition,adjustment
isrequired.Adjusteachlever,spring,androdseparately.
1.DisengagethePTO,movethecontrollevertothe
NEUTRAL-LOCKposition,andsettheparkingbrake.
2.MovethethrottlelevertotheSLOWposition,shutoff
theengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Removetheboltssecuringthefrontpanelandremove
thepanel(Figure52).
45