Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
Seat Kit, Model 30398 (sold separately)
1
Seat Suspension Kit, Model 30395 (sold
separately)
1
Seat belt
1
Capscrew, 7/16-20 x 1 inch
2
Lockwasher, 7/16 inch
2
Manual Tube
1
1
R-clamp
2
Install the seat, seat belt, and manual
tube.
2
No parts required
–
Grease the machine.
3
No parts required
–
Check the rear axle lubricant, hydraulic
uid, and engine oil levels
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Operator Video
1
4
Pre-delivery Inspection Sheet
1
Read the manuals and watch the video
before operating the machine.
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Step
1
Installing the Seat, Seat
Belt, and Manual Tube
Parts needed for this step:
1
Seat Kit, Model 30398 (sold separately)
1
Seat Suspension Kit, Model 30395 (sold
separately)
1
Seat belt
2
Capscrew, 7/16-20 x 1 inch
2
Lockwasher, 7/16 inch
1
Manual Tube
2
R-clamp
Procedure
T he mac hine is shipped without the seat assembly .
Delux e Seat Kit, Model No . 30398, and Seat
Suspension Kit, Model No . 30395, m ust be purc hased
and installed.
1. Mount the man ual tube to the seat suspension with
the 2 R-clamps included in loose par ts .
2. Install the seat belt to eac h side of the seat with a
bolt and loc k w asher , supplied in loose par ts .
Important: Mak e sur e that the seat s witch
is connected to the seat s witch connector on
the har ness.
3. Slide the seat completely forw ard and bac kw ard to
ensure proper operation and that seat switc h wires
and connectors are not pinc hed or do no contact
any mo ving par ts .
13
To Next Page
Loading...
