Toro 30868 Groundsmaster 4700-D - 2 Greasing the Machine; Reading the Manuals and Viewing the Video; 3 Checking Fluid Levels

Step
2
Greasing the Machine
No Parts Required
Procedure
Before the mac hine is operated, it m ust be g reased
to ensure proper lubrication. R efer to Lubrication ,
pag e 32 . F ailure to properly g rease the mac hine will
result in premature failure of critical par ts .
Step
3
Checking Fluid Levels
No Parts Required
Procedure
1. Chec k the rear axle lubricant lev el before the engine
is first star ted, refer to Chec king the R ear Axle
Lubricant in Dri v e System Maintenance , pag e 39 .
2. Chec k the h y draulic fluid lev el before the engine is
first star ted, refer to Chec king the Hy draulic Fluid
Lev el in Operation , pag e 19 .
3. Chec k the engine oil lev el before and after the
engine is first star ted, refer to Chec king the Engine
Oil Lev el in Operation , pag e 19 .
Step
4
Reading the Manuals and
Viewing the Video
Parts needed for this step:
1
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Operator Video
1
Pre-delivery Inspection Sheet
Procedure
1. R ead the man uals .
2. View the Operator video .
3. Store the documentation in a safe place .
14