Operation
Note: Deter mine the left and right sides of the
mac hine from the nor mal operating position.
T his machine pr oduces sound lev els in ex cess
of 85 dB A at the operator’ s ear and can cause
hearing loss thr ough extended periods of
exposur e.
W ear hearing pr otection when operating this
machine.
If y ou lea v e the k ey in the ignition s witch,
someone could accidentl y star t the engine and
seriousl y injur e y ou or other bystander s.
R emo v e the k ey fr om the ignition bef or e y ou do
an y maintenance.
Checking the Engine Oil
Level
T he engine is shipped with oil in the crankcase;
ho w ev er , the oil lev el m ust be c hec k ed before and after
the engine is first star ted.
T he crankcase capacity is appro ximately 8 qt. (7.6 l)
with the filter .
Use high-quality engine oil that meets the follo wing
specifications:
• API Classification Lev el R equired: CH-4, CI-4 or
higher .
• Prefer red oil: SAE 15W -40 (abo v e 0°F)
• Alter nate oil: SAE 10W -30 or 5W -30 (all
temperatures)
Note: T oro Premium Engine oil is a v ailable
from y our distributor in either 15W -40 or 10W -30
viscosity . See the par ts catalog for par t n umbers .
1. P ark the mac hine on a lev el surface .
2. Unloc k the engine co v er latc hes and open the
engine co v er .
3. R emo v e the dipstic k, wipe it clean, install the
dipstic k into the tube , and pull it out ag ain.
T he oil lev el should be up to the FULL mark
( Figure 10 ).
Figure 10
1. Dipstick
4. If the oil is belo w the FULL mark, remo v e the fill
cap ( Figure 11 ) and add oil until the lev el reac hes
the FULL mark. Do not o v erfill .
Figure 11
1. Oil ll cap
Note: W hen using different oil, drain all old oil
from the crankcase before adding new oil.
5. Install the oil fill cap and dipstic k.
6. Close the engine co v er and secure it with the
latc hes .
Checking the Cooling System
Chec k lev el of coolant at the beginning of eac h da y .
Capacity of system is 2-3/4 g al. (10.4 l).
1. Carefully remo v e the radiator cap and expansion
tank cap ( Figure 12 ).
19