Maintenance
Service Interval
Maintenance Procedure
Before storage
• Drain and clean the fuel tank.
• Check the tire pressure.
• Check all fasteners.
• Grease or oil all grease ttings and pivot points.
• Paint chipped surfaces.
Yearly
• Check the fuel lines and connections.
• Replace the fuel pre-lter.
• Change the planetary gear drive oil.
• Check the rear wheel toe-in.
Every 2 years
• Replace the interlock switches.
Important: R efer to y our engine Operator’ s Man ual and cutting unit Operator’ s Man ual f or additional
maintenance pr ocedur es.
29
To Next Page
Loading...
