CHASSIS
3-17
Toro 30” Aerator Service Manual
3
Axle Bearing Assembly Replacement
Axle Bearing Assembly Removal
1. Position the unit in the work area, raise and secure
the back of the unit as high as possible using two
jack stands to support the unit (Fig. 054).
4. Remove the four nuts securing the axle sub
assembly to the frame (Fig. 056).
Fig. 054 IMG-1044
2. Remove the drive tire on the side you are working
on.
3. Remove the lock nut securing the hub to the axle
shaft (Fig. 055). Remove the hub.
Fig. 055 IMG-1045a
Fig. 056 IMG-1048a
5. On the underside of the unit, loosen the nut for the
chain tensioner and slide the tensioner to the top of
the slot (Fig. 057).
Fig. 057 IMG-1052
To Next Page
Loading...
