GROUND DRIVE & TINE SYSTEMS
5-4
Toro 30” Aerator Service Manual
5
Tine Shaft Replacement
Tine Shaft Removal
1. Rotate the wheels until the master links on the drive
chains are in a position to be removed (Fig. 181).
Fig. 180 tine chain connector link
Fig. 181 drive chains
Tinebar Chain Assembly
Install the connecting links so the cover plate and spring
clip are to the OUTSIDE of the machine. Install spring
clip so opening is away from forward direction of rotation
(Fig. 180).
2. Loosen the drive wheel tensioners (A) and remove
the spring clips, cover plates, master links (B) and
chains (C) (Fig. 182).
Fig. 182 drive tensioner
B
C
A
To Next Page
Loading...
