Toro 33518 - Tine Wheel Assembly

GROUND DRIVE & TINE SYSTEMS
5-6
Toro 30” Aerator Service Manual
5
9. Remove bolts holding the inner ange bearings
while supporting the tine axles.
10. Carefully slide the tine axle assemblies out of the
trailing arm (Fig. 189).
Fig. 187 outer ange brgs
8. Loosen the bolts holding the inner ange bearings
(Fig. 188).
Fig. 188 inner ange brgs
Fig. 189 tine asm
Tine Wheel Assembly
(left side shown) (Fig. 190)
Fig. 190 tine wheel LH
7. Remove the bolts holding the outer ange bearings
(Fig. 187).