EasyManua.ls Logo

Toro 41229 - Maintenance; Recommended Maintenance Schedule; Daily Maintenance Checklist

Toro 41229
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
8 hours Clean the suction strainer
1
50 hours Lubricate the pump.
100 hours
Grease the spray system
Inspect the pump diaphragm and replace it if necessary.
Inspect the pressure dampener bladder and replace it if necessary.
Inspect the pump check valves and replace them if necessary.
Inspect the O-rings in the vale assemblies and replace them if necessary.
200 hours
Check all hoses for wear/cracking.
Inspect all hose connections for proper attachment.
1
More often when using wetable powers
Important Refer to your Workman
®
and engine operators manual for additional maintenance procedures.
Daily Maintenance Checklist
Duplicate this page for routine use.
For the week of:
Maintenance Check Item
Mon. Tues. Wed. Thurs. Fri. Sat. Sun.
Check the brake and parking brake
operation.
Check the gear shift/neutral operation.
Check the fuel level.
Check the engine oil level before filling
the tank.
Check the transaxle oil level before
filling the tank.
Inspect the air filter before filling the
tank.
Inspect the engine cooling fins before
filling the tank.
Check any unusual engine noises.
Check any unusual operating noises.
Check the tire pressure.
Check for fluid leaks.
Check the instrument operation.

Table of Contents

Related product manuals