Toro 41594 - Page 57

G014219
1
2
Figure77
1.Hydraulictank
2.Hydraulichoseandtting
3.Placealargepanunderthetting.
4.Removethehosettingfromthetank,allowingtheoil
todrainintothepan(Figure77).
5.Installthehoseandttingtothetankandtightenit
securely.
6.Fillthehydraulicreservoirwithapproximately53L(14
USgallons)ofspeciedhydraulicuidorequivalent,
seeHydraulicFluidSpecication(page55).
7.Startthemachineandrunitatidlefor3to5minutes
tocirculatetheuidandremoveanyairtrappedin
thesystem.
8.Stoptheengine,checkthehydraulicoillevel,andcheck
forleaks.
9.Disposeoftheusedoilatacertiedrecyclingcenter.
CheckingtheHydraulicLinesand
Hoses
Inspectthehydrauliclinesandhosesdailyforleaks,kinked
lines,loosemountingsupports,wear,loosettings,weather
deteriorationandchemicaldeterioration.Makeallnecessary
repairsbeforeoperating.
WARNING
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Ensurethatallhydraulicuidhosesandlinesare
ingoodconditionandallhydraulicconnections
andttingsaretightbeforeapplyingpressureto
thehydraulicsystem.
•Keepyourbodyandhandsawayfrompin
holeleaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulicleaks.
•Safelyrelieveallpressureinthehydraulicsystem
beforeperforminganyworkonthehydraulic
system.
•Getimmediatemedicalhelpifuidisinjected
intoskin.
57