2-3
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
SPECIFICATIONS
Specications
General Specifications (Cont.)
Model 74074 74096
Hp/Deck 37/72RD 37/96RD
Engine Yanmar Diesel
Engine Model 3TNV88C
High Idle 3000 ± 50 RPM
Low Idle 1400 ± 50 RPM
Engine Oil CJ-4 or higher
SAE 10W-30 or 5W-30 (all temperatures); SAE 15W-40 (above 0°F)
Oil Capacity 7 qts.
CARB Yes
EPA Yes
Fuel Capacity 12 gal.
Battery 12V Goup 26; 540 CCA
Hydraulic Drive System
Transmission Kanzaki KPS-18T
Transmission
Lubricant
Prem. Trans/Hyd Tractor Fluid
108-1184 (5 gal.)
108-1183 (55 gal.)
Alternate: Mobil 424
Max Ground
Speed
12.5 mph (Forward)
7.0 mph (Reverse)
Rear Tires 26 x 12.00-12, 6 ply
Rear Tire
Pressure
18 psi
Front Caster
Tires
15 x 6.00-6
Front Tire
Pressure
Semi-Pneumatic
Mower Deck
Deck Width 72 in. 96 in.
Deck
Conguration
5.0 in. Deep
Turbo Force
Rear Discharge
Deck Spindles Cast Iron Sealed Ball Bearings
Blade Tip Speed 18,500 fpm 18,100 fpm
Cutting Height 1 in. - 5-1/2 in.
1/4 in. increments