8-10
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
ELECTRICAL
Neutral Switch - Left and Right
The neutral switch is a single pole plunger type switch (Figure 8 and 9) (normally open) with two terminals. When
the plunger is depressed, the circuit closes and there is continuity between the terminals.
Motion Control Levers in neutral position (OUT), the switch will have continuity (closed).
Motion Control Levers in the operating position (IN), the switch will NOT have continuity (open).
Figure 8
Figure 9
To Next Page
Loading...
