Toro 74902TE - Stopping the Machine; Adjusting the Height-Of-Cut

StoppingtheMachine
Tostopthemachine,movethemotion-controllevers
toneutralandthentotheNEUTRAL-LOCKposition,
disengagetheblade-controlswitch(PTO),andturn
theignitionkeytotheOFFposition.
Settheparkingbrakewhenyouleavethemachine;
refertoSettingtheParkingBrake(page20).Remove
thekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandsetthe
parkingbrakewhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeight-of-Cut
UsingtheTransportLock
Thetransportlockhas2positions,andisusedwith
thedeck-liftpedal.ThereisaLOCKpositionand
anUNLOCKpositionforthetransportpositionofthe
mowerdeck(Figure24).
g032377
Figure24
Transport-LockPositions
1.Transportlock3.UNLOCKposition—The
mowerdeckdoesnotlock
intothetransportposition.
2.LOCKposition—The
mowerdecklocksintothe
transportposition.
26