Toro 74902TE - Brake Maintenance; Adjusting the Parking Brake

g010169
g010207
Figure77
1.Hydraulicunitshrouds
6.Overeachdipstick,removethecoverandthe
boltattachedtothecover.Cleanaroundeach
dipstickandhydraulicunit(Figure78).
g012434
Figure78
1.Cover
2.Bolt
7.Positiontheseat.
BrakeMaintenance
AdjustingtheParking
Brake
ServiceInterval:Aftertherst100hours
Every500hoursthereafter
Checkthatthebrakeisadjustedproperlybefore
adjusting.
1.Drivethemachineontoalevelsurface.
2.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andengagetheparkingbrake.
3.Shutofftheengine,waitforallmovingpartsto
stop,andremovethekey.
4.Raisethebackofthemachineandsupportthe
machinewithjackstands.
DANGER
Mechanicalorhydraulicjacksmayfail
tosupportmachineandcauseaserious
injury.
•Useajackstandwhensupportingthe
machine.
•Donotusehydraulicjacks.
5.Removethereartiresfromthemachine.
6.Removeanydebrisfromthebrakearea.
7.Rotatethedrive-wheelreleasehandleto
thereleasedposition.RefertoUsingthe
Drive-WheelReleaseValves(page30).
8.Checkifthereisavisiblegapbetweenthe
L-bracketandthelinkagestop(Figure79).
55