Toro 74902TE - Adjusting the Tracking; Checking the Tire Pressure

g008943
Figure64
1.ROPSknob(locked
position)
3.Rollbarintheupright
position
2.PulltheROPSknobout,
androtateit90degrees
tochangetherollbar
position.
4.Rollbarinthefolded
position
AdjustingtheTracking
1.Disengagetheblade-controlswitch(PTO).
2.Drivetoanopen,atareaandmovethe
motion-controlleverstotheNEUTRAL-LOCK
position.
3.MovethethrottlemidwaybetweentheFASTand
SLOWpositions.
4.Movebothmotion-controlleversforwarduntil
theybothhitthestopsintheT-slot.
5.Checkwhichwaythemachinetracks.
6.Ifthemachinetrackstotheright,loosenthe
boltsandadjusttheleftstopplaterearwardon
theleftT-slotuntilthemachinetracksstraight
(Figure65).
7.Ifthemachinetrackstotheleft,loosenthebolts
andadjusttherightstopplaterearwardonthe
rightT-slotuntilthemachinetracksstraight
(Figure65).
8.Tightenthestopplate(Figure65).
g027340
Figure65
Leftcontrollevershown
1.Controllever3.Stopplate
2.Bolt
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthereartiresat90kPa
(13psi).Uneventirepressurecancauseunevencut.
Checkthetireswhentheyarecoldtogetthemost
accuratepressurereading.
Note:Thefronttiresaresemi-pneumatictiresanddo
notrequireairpressuremaintenance.
49