Toro 79412 - Installation for Models 79412 & 79413

4. On the top of the chute, engage the
hook-shaped latch around the pivot rod of the
deector assembly ( Figure 26 and Figure 27 ).
g300230
Figure 26
g300231
Figure 27
1. Chute
3. Latch
2. Deector
4. Pivot rod
5. Hook the exible latch on the chute to the
retaining clasp welded on the mower deck
g299268
Figure 28
1. Chute
3. Flexible latch
2. Retaining clasp
Install the Chute on Model 7941 1
1. T ilt the chute and install the pin into the hole on
the mower deck.
g300377
Figure 29
2. Pivot the chute back and toward the deck so the
chute is ush with the mower deck.
15