Toro 79412 - Page 16

Note: Ensure that the retaining hook on the
chute is out of the way so the chute opening
mounts ush to the deck.
3. On the top of the chute, engage the
hook-shaped latch around the pivot rod of the
deector assembly and install the rod into the
hole on the mower deck).
g300375
Figure 30
4. Hook the exible latch on the chute to the
retaining clasp welded on the mower deck.
g299268
Figure 31
1. Chute
3. Flexible latch
2. Retaining clasp
Install the Chute on Model 79412
1. T ilt the chute and install the pin into the hole on
the mower deck.
g300377
Figure 32
2. Pivot the chute back and toward the deck so the
chute is ush with the mower deck.
16