Toro 79412 - Page 17

Note: Ensure that the retaining hook on the
cute is out of the way so the chute opening
mounts ush to the deck.
3. On the top of the chute, engage the
hook-shaped latch around the pivot rod of the
deector assembly and install the rod into the
hole on the mower deck
g300375
Figure 33
4. Hook the exible latch on the chute to the
retaining clasp welded on the mower deck.
g299268
Figure 34
1. Chute
3. Flexible latch
2. Retaining clasp
Install the Chute on Model 79413
1. Install the chute to the mower deck with the
hand knob.
g300215
Figure 35
17