Toro Greensmaster
3150 - Page 42

HighViscosityIndex/LowPourPoint
Anti-wearHydraulicFluid,ISOVG46
MaterialProperties:
Viscosity,ASTMD445cSt@40°C(104°F)
44to48
ViscosityIndexASTMD2270
140orhigher
PourPoint,ASTMD97-37°Cto-45°C(-34°F
to-49°F)
IndustrySpecications:EatonVickers694(I-286-S,
M-2950-S/35VQ25or
M-2952-S)
Note:Manyhydraulicuidsarealmostcolorless,
makingitdifculttospotleaks.Areddyeadditivefor
thehydraulicuidisavailablein20ml(0.67oz)
bottles.Abottleissufcientfor15to22L(4to6US
gallons)ofhydraulicuid.OrderPartNo.44-2500
fromyourauthorizedTorodistributor.
Important:ToroPremiumSynthetic
BiodegradableHydraulicFluidistheonly
syntheticbiodegradableuidapprovedbyToro.
Thisuidiscompatiblewiththeelastomersused
inTorohydraulicsystemsandissuitablefora
wide-rangeoftemperatureconditions.Thisuidis
compatiblewithconventionalmineraloils,butfor
maximumbiodegradabilityandperformance,the
hydraulicsystemshouldbethoroughlyushedof
conventionaluid.Theoilisavailablein19L(5
USgallons)pailsor208L(55USgallons)from
yourauthorizedTorodistributor.
CheckingtheHydraulic-Fluid
Level
1.Positionthemachineonalevelsurface.
Note:Ensurethatthemachinehascooled
downsotheuidiscold.
2.Checktheuidlevelaccordingtothetankon
yourmachine:
•Iftheauxiliaryhydraulictankhasasight
window,checktheoillevelthere(Figure54),
andproceedtostep5.
Note:Iftheuidlevelisbetweenthe2
marksonthesightwindow,theuidlevelis
sufcient.
•Iftheauxiliaryhydraulictankdoesnothave
asightwindow,locatethedipstickonthe
topofthemachine(Figure54)andproceed
tostep3.
g221413
Figure54
1.Sightwindow
3.Dipstick
2.Hydraulictankcap
3.Removethedipstickandwipeitwithaclean
rag,thenscrewthedipstickbackintothetank.
4.Removethedipstickandchecktheuidlevel.If
itisbetweenthemarksonthedipstick,thelevel
issufcient.Iftheuidlevelisnotbetweenthe
marks,adjusttheuidlevelaccordingly(Figure
55).
g227716
Figure55
5.Removethecapfromthehydraulicuidtank
andslowlyllthetankwiththeappropriatehigh
qualityhydraulicuiduntilthelevelisbetween
the2marksonthesightwindowordipstick.
Important:Topreventsystem
contamination,cleanthetopofthe
hydraulic-uidcontainersbeforepuncturing
them.Ensurethatthepourspoutandfunnel
areclean.
Note:Donotmixhydraulicuids.
6.Installthecap.
42