Toro Groundsmaster 360 - Hauling the Machine; Locating the Tie-Down Points

PushingtheMachine
1.Disengagethepowertakeoff(PTO),turnthekey
totheOFFposition,removethekey,andengage
theparkingbrake.
2.Lifttheseat.
3.Rotateeachbypassvalvecounterclockwise
1turn(Figure63).
Note:Thisallowshydraulicuidtobypassthe
pump,enablingthewheelstoturn.
Important:Donotrotatethebypassvalves
morethan1turn.Thispreventsthevalves
fromcomingoutofthebodyandcausing
uidtorunout.
4.Disengagetheparkingbrakebeforepushing
themachine.
ChangingtoMachineOperation
1.Rotateeachbypassvalveclockwise1turnand
handtightenthem(Figure63).
Note:Donotovertightenthebypassvalves.
2.Torquethevalvesapproximately8N∙m(71in-lb)
asshowninFigure63.
Note:Themachinedoesnotdriveunlessthebypass
valvesareturnedin.
g014270
Figure63
1.Bypassvalves
HaulingtheMachine
•Removethekeyandshutoffthefuel(ifequipped)
beforestoringortransportingthemachine.
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
LocatingtheTie-Down
Points
Therearetiedownslocatedatthefrontandrearsides
ofthemachine(Figure64).
Note:Useproperly-ratedDOT-approvedstrapsin4
cornerstotiedownthemachine.
•2onthefrontoftheoperator'splatform
•Reartire
g014264
Figure64
1.Fronttie-downpoint2.Reartie-downpoint
44