Toro Reelmaster 3555 - Using the Cutting-Unit Kickstand; Installing the Hood Latch

4
UsingtheCutting-Unit
Kickstand
Partsneededforthisprocedure:
1
Cutting-unitkickstand
Procedure
Wheneveryoutipacuttingunittoexposethe
bedknife/reel,propuptherearofthecuttingunitwith
thekickstandtoensurethatthenutsonthebackend
ofthebedbaradjustingscrewsarenotrestingonthe
worksurface(Figure15).
g020158
Figure15
1.Cutting-unitkickstand
Securethekickstandtothechainbracketwiththe
snapperpin(Figure16).
g004144
Figure16
1.Chainbracket3.Cutting-unitkickstand
2.Snapperpin
5
InstallingtheHoodLatch
CEMachines
Partsneededforthisprocedure:
1Lockbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
2.Removetherivets(2)securingthehood-latch
brackettothehood(Figure17).Removethe
hood-latchbracketfromthehood.
18