Toro Reelmaster 3555 - Controls System Maintenance; Adjusting Mow Ground Speed; Adjusting the Throttle

ControlsSystem
Maintenance
AdjustingMowGround
Speed
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Loosenthejamnutforthespeedstopscrew.
3.Adjustthespeedstopscrewasfollow:
Note:Themowspeedissetatthefactoryto
9.7km/h(6mph).
•Todecreasethemowspeed,rotatethe
speedstopscrew(Figure89)clockwise.
•Toincreasethemowspeed,rotatethespeed
stopscrewcounterclockwise.
g352075
Figure89
1.Speedstopscrew
4.Holdthestopscrewandtightenthejamnut.
5.Testdrivethemachinetoconrmthemaximum
mowspeedadjustment.
AdjustingtheThrottle
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Unlatchandopenthehood.
3.Positionthethrottleleverrearwardsothatit
stopsagainstthecontrolpanelslot.
4.Loosenthethrottlecableconnectoronthe
injectionpumpleverarm(Figure90).
g020336
Figure90
1.Injectionpumpleverarm
5.Holdtheinjectionpumpleverarmagainstthe
lowidlestopandtightenthecableconnector.
6.Loosenthescrewssecuringthethrottlecontrol
tothecontrolpanel.
7.Pushthethrottlecontrolleveralltheway
forward.
8.Slidethestopplateuntilitcontactsthethrottle
leverandtightenthescrewssecuringthethrottle
controltothecontrolpanel.
9.Ifthethrottledoesnotstayinpositionduring
operation,torquethelocknut,usedtosetthe
frictiondeviceonthethrottlelever,to5to6N∙m
(44to53in-lb).
Note:Themaximumforcerequiredtooperate
thethrottlelevershouldbe89N(20lb).
10.Closeandlatchthehood.
58