Toro Reelmaster 3555 - Lubrication; Greasing the Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours(dailywhen
conditionsaredustyanddirty).
GreaseSpecication:No.2lithiumgrease
Themachinehasgreasettingsthatyoumust
lubricateregularly.Dustyanddirtyoperating
conditionscouldcausedirttogetintothebearings
andbushings,resultinginacceleratedwear.Lubricate
thegreasettingsimmediatelyaftereverywashing,
regardlessoftheintervalspecied.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Greasettingsatthelocationsandforquantities
areasfollows:
•Steeringpivot(Figure54)
g008897
Figure54
•Frontlift-armpivotsandliftcylinders(3
each);refertoFigure55.
g034347
Figure55
•Rearlift-armpivotsandliftcylinders(3each
side);refertoFigure56.
g200803
Figure56
•Cuttingunitpivots(2each);refertoFigure
57.
g020393
Figure57
•Neutraladjustmechanism(Figure58)
g008901
Figure58
•Mow/transportslide(Figure59)
42