Toro Reelmaster 3555 - Changing the Hydraulic Filter

6.Starttheengineanduseallthehydraulic
controlstodistributethehydraulicuid
throughoutthesystem.
7.Checkforleaks;thenshutofftheengine.
8.Checktheuidlevelandaddenoughtoraise
theleveltoFullmarkonthedipstick.
Important:Donotoverllthereservoir.
ChangingtheHydraulic
Filter
ServiceInterval:Every1,000hours—Ifyou
areusingtherecommended
hydraulicuid,replacethe
hydrauliclter.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
lledthereservoirwithanalternativeuid,
replacethehydrauliclter.
WARNING
Hothydraulicuidcancausesevereburns.
Allowthehydraulicuidtocoolbefore
performinganymaintenancetothehydraulic
system.
UseagenuineTororeplacementlter(PartNo.
86-3010).
Important:Useofanyotherltermayvoidthe
warrantyonsomecomponents.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Cleanaroundtheltermountingarea.Placea
drainpanunderthelter(Figure94)andremove
thelter.
g034351
Figure94
1.Hydrauliclter
2.Filterhead
3.Lubricatethenewltergasketandllthelter
withhydraulicuid.
4.Ensurethattheltermountingareaisclean.
Screwthelteronuntilthegasketcontactsthe
mountingplate;thentightenthelter1/2turn.
5.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andcheckforleaks.
61