Cleaning the Fuel-Pickup Tube Screen (continued)
G415056
3. Remove the 2-socket connector of the fuel-
sender harness
from the 2-pin connector of
the machine wire harness
.
G415057
4. Move the clamps that secure the hoses
to the fittings of the fuel sender inboard, and
remove the hoses from the fittings.
G415058
5. Loosen the fuel-sender cap .
6. Carefully lift the fuel sender from the tank.
Note: Do not bend the pick-up tube, return
tube, or float arm.
Maintenance: Fuel System Maintenance Page 6–23 3464-478 A
To Next Page
Loading...
