Lowering the Seat
1. Rotate the seat slightly, and lift the front prop rod out of the dent of the seat-support slot.
2. Carefully lower the seat until it latches securely.
Separating the Generator Cooling-Air Shrouds
G414736
1. Remove the 4 bolts and 4 locknuts that
secure the upper
and lower generator
cooling-air shrouds.
2. Separate the shrouds and lift the upper shroud
to access the driveshaft grease fittings.
Assembling the Generator Cooling-Air Shrouds
G414737
1. Align the grooves in the upper and lower
generator cooling-air shrouds with the
driveshaft-brush seal
and the flange of
the generator cover.
3464-478A Page 6–8 Maintenance: Pre-Maintenance Procedures
To Next Page
Loading...
