Toro Reelmaster 5010- H - Cruise-Control Switch; Engine-Speed Switch; Power-Takeoff (PTO) Switch

Cruise-Control Switch
G461362
Engage cruise control—briefly pivot
the switch forward.
Note: Use the display buttons to
adjust the cruise control speed in 0.8
km/h (0.5 mph) increments.
Turn on cruise control—pivot the
switch to the middle position.
Turn off cruise control—pivot the
switch backward.
Engine-Speed Switch
G461359
Briefly tap the switch forward to
increase engine speed in 100 rpm
increments; press and hold to move the
engine to High idle
Briefly tap the switch backward to
decrease engine speed in 100 rpm
increments; press and hold to move the
engine to Low idle
Power-Takeoff (PTO) Switch
G453441
Disengage PTO—The machine is
in T
RANSPORT mode (allows you to drive
up to 16 km/h (10 mph) when the
maximum speed is not limited).
Engage PTO—The machine is in
M
OW mode (allows you to drive up to 13
km/h (8 mph) when the maximum
speed is not limited).
Note: Use the protected menus
in the InfoCenter display to set
the maximum speed for each mode.
Product Overview: Controls Page 4–3 3464-478 A