Page 5 – 3 Electrical SystemSand Pro & Infield Pro 3040/5040
Battery Terminal Protector
Part Number: 107–0392
Battery Terminal Protector is an aerosol spray that
should be used on battery terminals to reduce corrosion
problems. Apply terminal protector after battery cable
has been secured to battery terminal.
Figure 3
Battery Hydrometer
Use the Battery Hydrometer when measuring specific
gravity of battery electrolyte. Obtain this tool locally.
Figure 4
Spark Tester
Part Number: TOR4036
The spark tester can be used to test magneto ignitions.
The spark tester determines if ignition is present.
Figure 5
Engine
Electrical
System
To Next Page
Loading...