Gasoline Engine Page 3 – 2 Sand Pro & Infield Pro 3040/5040
Introduction
This Chapter gives information about specifications,
maintenance, troubleshooting, testing and repair of the
Briggs and Stratton gasoline engine used in Sand Pro
and Infield Pro machines.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Briggs and Stratton Repair
Manual that is included at the end of this Chapter. The
use of some specialized test equipment is explained.
However, the cost of the test equipment and the special-
ized nature of some repairs may dictate that the work be
done at an engine repair facility.
Service and repair parts for the Briggs and Stratton en-
gine used to power the Sand Pro or Infield Pro are sup-
plied through your local Toro distributor or your local
Briggs and Stratton dealer or distributor. If no parts list
is available, be prepared to provide your distributor with
the Toro equipment model and serial numbers as well as
the Briggs and Stratton engine model and serial num-
bers.
To Next Page
Loading...