79
CC013D
8. While holding the chain, slide the sprocket and camshaft
out of the cylinder head.
NOTE: Loop the chain over the cylinder and secure
it to keep it from falling into the crankcase.
FI620
9. Remov e the cap scre w securing the chain tensioner
(account for a washer); then remov e the tensioner.
FI617
10. Remov e the fi ve nuts securing the cylinder head to the
cylinder.
CC017D
CC018D
11. Remove the four cylinder head bolts.
12. Remove the cylinder head from the cylinder, remove
the gasket, and account for two alignment pins; then
remove the cam chain guide.
CC020D
AT THIS POINT
To service valves and cylinder head, see Servicing Top-
Side Components sub-section.
AT THIS POINT
To inspect cam chain guide, see Servicing Top-Side
Components sub-section.
To Next Page
Loading...
