Installing
the
remote
control
batteries
1 Remove the battery cover from the back
of
the remote control.
2 Install two
"AAA"
size batteries, making
sure to match the
+ and - signs on the
batteries to the signs on the battery
compartment.
3 Reinsert the battery cover in the remote
control until the tab snaps.
Caution: Batteries must not be exposed
to excessive heat such as sunshine, fire or
the like.
Note:
• Be sure
to
use AAA size batteries.
• Dispose
of
batteries
in
a designated disposal
area.
• Batteries should always
be
disposed
of
with
the environment
in
mind. Always dispose
of
batteries
in
accordance with applicable laws
and
regulations.
•
If
the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
•
When
necessary
to
replace batteries
in
the
remote control, always replace both batteries
with new ones Never mix battery types or use
new
and
used batteries
in
combination.
• Always remove batteries from the remote
control if they are
dead
or if the remote
control
is
not
to
be
used for an extended
period
of
time. This will prevent battery
acid
from leaking into the battery compartment.
I
20
Remote
control
effective
range
For
optimum
performance, aim the remote control
directly at the
TV
and make sure there
is
no
obstruction between the remote control and the TV.
Point remote control toward
remote sensor on front of TV
To Next Page
Loading...
