Note:
The
screen
is
disrupted momentarily
when adjusting the
PC
settings.
This
is
not a
sign
of
malfunction.
.M9~~:rL;·/.o.";g;;P,ij~~tipti~i«·l·)j'···)H/'··
....
'>'
.•
" .
Horizontal Moves the picture left/right.
Position The adjustment range
is
within ±50 from
center.
*
Moves the picture up/down.
The adjustment range
is
within ± I0 from
center.
*
Vertical
Position
To
unlock the control panel:
Select
Off
in step 5 above,
or
press and hold the
VOLUME
- button on the
TV
control panel for about
10
seconds until the volume icon appears.
5 Press
~
to select
On.
When
the control panel
is
locked and any button on the control panel
(except
POWER)
is pressed, the message
"NOT
AVAILABLE" appears.
Setting
the
PC
Audio
* The default settings may vary depending
on
the input signal format.
This function allows you to output
or
mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable.
(1& page 18)
To
set the PC Audio:
Highlight this item then press 8
to get an
optimum
adjustment
automatically.
Helps to reduce noise and minimize
periodic vertical stripes on the screen.
The adjustment range
is
within
±IO
from
center.~'
Helps to reduce noise
and
sharpen the
picture.
The
adjustment range
is
within ±
16
from
center.
*
Auto
Adjust
Sampling
Clock
Clock
Phase
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and
press
8.
3
Press"
or
T to select
PC
Audio
and then press
....
or
~
to select
No
or
Yes.
Yes:
When viewing the PC input, the audio from the PC
Audio input can be heard.
No:
When viewing the PC input, there will
be
no
audio.
Note: Because the
PC
and
HOMI-1 inputs
share the same set
of
analog audio inputs,
the
PC Audio menu setting influences the
HDMI 1 Audio menu setting.
If
PC Audio
(continued)
Note:
If
a
PC
is
not connected or there
is
no
pc
input signal, this feature will
be
grayed
out
in
the Setup menu.
4
Press"
or
T to highlight the item you want to
adjust.
5 Press
....
or
~
to make the appropriate
adjustments.
Using
the
PC
settings
feature
You
can
view an
image
from a PC on the
TV
screen.
When
a PC
is
connected
to the
TV's
PC
IN
terminal, you
can
use the PC Settings feature to
make adjustments to the image.
If
the edges
of
the
picture are cut off, readjust the
Horizontal
Position
and
Vertical
Position.
If
the picture
is
affected by
interference, readjust the
Clock
Phase
and
Sampling
Clock.
To
adjust the PC settings:
1 Repeatedly press
~
to select PC input mode
(1& "Selecting the video input source to view"
page 29).
2
MENU
Press 0 and open the
Setup
menu.
3 Highlight
PC
Settings
and press
@.
44
To Next Page
Loading...
