To
set the Daylight Saving Time status:
1 Press
....
or
~
to select
Yes
or
No,
highlight
Done,
and then press @.
Viewing
the
system
status
To
view the system status:
1
MENU
Press 0 and open the
Setup
menu.
2 Highlight
Installation
and press @.
3 A new set
of
Installation menu icons will appear.
Open the
System
Status
menu, highlight
System
Information,
and press @.
4 Press
....
~
to scroll through the menu bar to select
the
Factory
Defaults
or
Support
Information
and
view the related information.
To
close the screen and return to the
Installation menu:
Highlight
DONE
and press @.
To
return to normal viewing:
EXIT
Press
O.
Reset
Factory
Defaults
To
reset all settings and channels to their
factory default values:
1
MENU
Press 0 and open the
Setup
menu.
2 Highlight
Installation
and press @. A new set
of
Installation menu icons will appear.
3
Open
the
System
Status
menu, highlight
System
Information,
and press @.
4 Press
....
~
to scroll through the menu bar to select
Factory
Defaults.
5 Highlight
Yes
and press @.
6 (If PIN code has been set, enter your PIN code. Press
....
or
~
to select
Done
and press
@.)A
warning
message will appear, select
Yes
and press @, the
TV
will turn offautomatically after a few seconds. After
the
TV
turns off, unplug the
TV
power cord and then
plug
it
in
again to complete the reset process.
To
cancel the reset:
Select
No
and press @ in step 5 above.
I
28
To Next Page
Loading...
